Features:
- 2x fully threaded plastic rods. Nylon PA66 / Polyamide 66. Natural colour. M5 x 1000 mm. Pitch: 0.8 mm. SKU: 1007.
- Good hardness and abrasion resistance make PA66 suitable for practical workshop studding and reusable light fixtures.
- Dry PA66 is electrically insulating, but moisture and installation conditions should be considered where insulation matters.
- The 1000 mm length can be kept whole or cut into several matching M5 threaded sections.
- Use for panel spacing, custom stand-offs, light brackets and cut-to-length plastic threaded rods.
Product Summary:
These M5 x 1000 mm Natural Nylon PA66 threaded rods are supplied as two fully threaded plastic bars for custom stand-offs, panel spacing, light fixtures and non-metallic threaded runs. PA66 provides a practical balance of toughness, wear resistance and thread engagement for workshop assemblies that do not need metal studding. The 1000 mm length gives room for several shorter pieces or one longer run. Allow for nylon’s moisture uptake if dimensional stability is critical, and use compatible M5 nuts with sensible tightening force.
| Core Technical Details | |
|---|---|
| Product Type | Threaded Rods |
| Size (mm) | M5 x 1000mm |
| Material | Nylon / Polyamide 66 |
| Colour | Natural |
| Quantity | 2 |
| Dimensions - mm | |
| Diameter -mm | 5.00 |
| Length - mm | 1000 mm (L) |
| Width -mm | 5 mm (W) |
| Thickness / Depth -mm | 5 mm (D) |
| Pitch - mm | 0.8 |
| Dimensions - Inches Conversion | |
| Length -inches | 39.37 |
| Width -inches | 0.197 |
| Thickness / Depth -inches | 0.197 |
| Pitch - inches | 0.031 |
| Product Download Sheets | |
| Material Data Sheet | Nylon PA66 — Material Datasheet |
| Product Data Sheet | Nylon PA66 — Screws & Bolts Datasheet |
| Safety Data Sheet | Conformity Safety |
| Type | |
|---|---|
| Technical Drawing | https://caterpillar-red.com/content/Technical_Drawings/A-Technical-Drawing-Threaded-Rod-Stud.jpg |
| Bolt Dimensions | Stock Code: CR-Rod-07056-PA66 Material: Nylon PA66 Material Reference: PA66 Head/Drive Type: Fully Threaded Rod size: M5 x 1000 D: 5 mm Pitch: 0.8 mm L: 1000 mm |
| Width -mm | 5 mm (W) |
| Length - mm | 1000 mm (L) |
| Thickness / Depth -mm | 5 mm (D) |
| Diameter -mm | 5.00 |