Start with the material name. Check the exact grade and product specification before choosing a part.
Groups help you browse. They are not performance ratings.
PA66 Nylon 66 Consider moisture, dimensions and the conditions in which the part will work.
PA66+GF Glass-filled nylon 66 Check the glass content and grade before comparing it with unfilled nylon.
MXD6 RENY reinforced polyamide Check the specified RENY grade and reinforcement for the individual part.
PFA Perfluoroalkoxy Compare the grade and service conditions with the relevant technical data.
PTFE Polytetrafluoroethylene Include load, temperature and dimensional requirements in your selection.
PVDF Polyvinylidene fluoride Check the grade and the specific chemicals and temperatures involved.
PE Polyethylene Check which polyethylene grade is specified; the abbreviation alone is not enough.
PC Polycarbonate Check the exact material and grade rather than treating clear plastics as interchangeable.
PEEK Polyether ether ketone Compare the exact grade with your temperature, load and exposure requirements.
PEI Polyetherimide Check the grade, service temperature and relevant approvals for your application.
PMMA Acrylic Check whether the listing specifies acrylic or another clear plastic.
POM Acetal Compare the stated grade, dimensions and operating conditions.
PP Polypropylene Check the grade and the mechanical, thermal and electrical demands of the part.
PPS Polyphenylene sulfide Look at the specified grade and any reinforcement when comparing properties.
PVC Polyvinyl chloride Check the formulation and whether the specified material is rigid or flexible.
