Stock code 998
2x White PTFE M3 x 1000 mm Threaded Rods, Plastic Studding + 4 Nuts
A closer look.
The details, at a glance.
- Thread M3
- Length 1000 mm
- Material PTFE / Polytetrafluoroethylene
- Colour White
- Pack size 2
Out of stock
Ask about lead time or a quoteOut of stock
Dimensions & documents
Check the fit. Technical specification
- Product type
- Threaded Rods
- Size (mm)
- M3 x 1000mm
- Thread
- M3
- Material
- PTFE / Polytetrafluoroethylene
- Colour
- White
- Pack size
- 2
- Diameter
- 3.00 mm
- Length
- 1000 mm
- Width
- 3 mm
- Thickness / depth
- 3 mm
- Pitch
- 0.5 mm
Inch values are converted from millimetres. Fractions are approximate, rounded to the nearest 1/16 in. Thread diameter and pitch are not shown as fractions.
Bolt, nut and washer dimensions
Bolt
Material: Polytetrafluoroethylene, Head/Drive Type: Fully Threaded Rod, size: M3 x 1000, D: 3 mm, Pitch: 0.5 mm, L: 1000 mm
Description
Features
- Pack of 2 threaded rods. Colour: White. Material: PTFE / Polytetrafluoroethylene. Length: 1000mm. Diameter: 3mm. Pitch: 0.5mm. 4 nuts included (2 per rod). SKU: 998.
- PTFE gives low friction, electrical insulation and broad chemical resistance, useful where a small non-metallic threaded rod is preferred.
- Fine M3 format — suited to light spacing, alignment and isolation jobs rather than high-load fastening.
- Fully threaded along the full 1000 mm length, so it can be used as a long rod or cut into shorter plastic studs.
- Use with correctly sized metric nuts and washers; avoid over-tightening because PTFE is relatively soft. Also known as studding, allthread, threaded bar.
Product Summary
These M3 x 1000 mm white PTFE threaded rods are supplied as a pair of fully threaded plastic studding bars. The small 3 mm diameter and 0.5 mm pitch suit fine spacing, alignment and isolation work where a metal rod is not required. PTFE gives a low-friction, electrically insulating, non-metallic thread and broad chemical resistance for suitable environments. Because PTFE is relatively soft and can deform under sustained loads, it should be used for light-duty assemblies with load, thread engagement and chemical compatibility checked before use. The 1000 mm length can be cut down to shorter studs or spacer rods as needed. Supplied with 4 nuts.
Reviews from our marketplace customers
Write a ReviewWrite a Review
Caterpillar Red
2x White PTFE M3 x 1000 mm Threaded Rods, Plastic Studding + 4 Nuts
No reviews yet.