Features:
- 2x threaded rods. 4 nuts included. Material: Nylon Polyamide 66 / PA66. Colour: Natural. Size: M4 x 500 mm. Diameter: 4mm. Pitch: 0.7mm. SKU: 966.
- PA66 balances toughness and abrasion resistance in a slim M4 format, giving a practical non-metal thread for light mechanical work.
- Moisture note — nylon can absorb some moisture, so check thread fit and dimensions if the part will be used in damp conditions.
- The 500 mm length gives usable stock for trimming into smaller threaded sections with suitable cutting tools.
- Use for cut-to-length spacers, light guide rods and small fixture positions that need the slimmer M4 thread, with careful tightening and checks for plastic-thread suitability.
Product Summary:
These M4 x 500 mm natural PA66 threaded rods are supplied as 2 fully threaded plastic rods. PA66, also called nylon polyamide 66, is a tough engineering plastic with useful wear resistance and good low-friction behaviour for nut fitting in light assemblies. This size is suited to cut-to-length spacers, light guide rods and small fixture positions that need the slimmer M4 thread where a lighter non-metal rod is preferred. Nylon can absorb some moisture, so check thread fit and dimensional tolerance in damp or changing environments. Cut with suitable tools, avoid over-tightening the plastic thread and confirm material suitability before final use. Supplied with 4 nuts.
