Features:
- 2x fully threaded plastic rods. Nylon PA66 / Polyamide 66. Natural colour. M4 x 1000 mm. Pitch: 0.7 mm. SKU: 1006.
- PA66 gives a tougher, more wear-resistant thread than many softer plastics, useful for repeated adjustment with matching nuts.
- Moisture note: nylon can absorb water, so check fit where small dimensional changes could matter.
- Slim M4 thread suits small spacer links, adjustment points and neat plastic-studding details.
- Cut to length for light jigs, small stand-offs, alignment pieces and non-metallic threaded joins.
Product Summary:
These M4 x 1000 mm Natural Nylon PA66 threaded rods are supplied as a pair of fully threaded plastic studding bars for small threaded spacers, alignment points, light jigs and cut-to-length workshop pieces. PA66 is a tough engineering plastic with good wear resistance and low-friction behaviour, so it suits repeated nut adjustment better than many softer plastics. Because nylon can absorb moisture, check fit and tolerance where the rods will be used in damp conditions. Cut to length with suitable tools and use with compatible M4 nuts without over-tightening.
| Core Technical Details | |
|---|---|
| Product Type | Threaded Rods |
| Size (mm) | M4 x 1000mm |
| Material | Nylon / Polyamide 66 |
| Colour | Natural |
| Quantity | 2 |
| Dimensions - mm | |
| Diameter -mm | 4.00 |
| Length - mm | 1000 mm (L) |
| Width -mm | 4 mm (W) |
| Thickness / Depth -mm | 4 mm (D) |
| Pitch - mm | 0.7 |
| Dimensions - Inches Conversion | |
| Length -inches | 39.37 |
| Width -inches | 0.157 |
| Thickness / Depth -inches | 0.157 |
| Pitch - inches | 0.028 |
| Product Download Sheets | |
| Material Data Sheet | Nylon PA66 — Material Datasheet |
| Product Data Sheet | Nylon PA66 — Screws & Bolts Datasheet |
| Safety Data Sheet | Conformity Safety |
| Type | |
|---|---|
| Technical Drawing | https://caterpillar-red.com/content/Technical_Drawings/A-Technical-Drawing-Threaded-Rod-Stud.jpg |
| Bolt Dimensions | Stock Code: CR-Rod-07055-PA66 Material: Nylon PA66 Material Reference: PA66 Head/Drive Type: Fully Threaded Rod size: M4 x 1000 D: 4 mm Pitch: 0.7 mm L: 1000 mm |
| Width -mm | 4 mm (W) |
| Length - mm | 1000 mm (L) |
| Thickness / Depth -mm | 4 mm (D) |
| Diameter -mm | 4.00 |