Features:
- 2x fully threaded plastic rods. 4 nuts included. Nylon / Polyamide 66 PA66. Natural. M10 x 1000 mm. Pitch: 1.5 mm. SKU: 1010.
- PA66 nylon gives a tough, wear-resistant plastic thread for suitable spacer, jig and alignment work.
- Low-friction nylon surface helps when the rod is adjusted through matching M10 nuts during setup.
- Cut the 1000 mm length to produce matching threaded spacers, stand-offs or custom rod sections.
- Use for light-duty non-metallic fixing and spacing; avoid using plastic threads where the assembly load has not been checked.
Product Summary:
These M10 x 1000 mm natural PA66 nylon threaded rods are supplied as a pair of fully threaded plastic studding bars. PA66 is a tough engineering nylon with good wear resistance, low-friction behaviour and dependable thread engagement for suitable light-duty plastic assemblies. The 1000 mm length can be cut down for spacers, alignment bars, stand-offs or custom threaded sections. As with all nylon, moisture can affect dimensions slightly, so check fit, service conditions and tightening force before use. Supplied with 4 nuts.
| Core Technical Details | |
|---|---|
| Product Type | Threaded Rods |
| Size (mm) | M10 x 1000mm |
| Material | Nylon / Polyamide 66 |
| Colour | Natural |
| Quantity | 2 |
| Dimensions - mm | |
| Diameter -mm | 10.00 |
| Length - mm | 1000 mm (L) |
| Width -mm | 10 mm (W) |
| Thickness / Depth -mm | 10 mm (D) |
| Pitch - mm | 1.5 |
| Dimensions - Inches Conversion | |
| Length -inches | 39.37 |
| Width -inches | 0.394 |
| Thickness / Depth -inches | 0.394 |
| Pitch - inches | 0.059 |
| Product Download Sheets | |
| Material Data Sheet | Nylon PA66 — Material Datasheet |
| Product Data Sheet | Nylon PA66 — Screws & Bolts Datasheet |
| Safety Data Sheet | Conformity Safety |
| Type | |
|---|---|
| Technical Drawing | https://caterpillar-red.com/content/Technical_Drawings/A-Technical-Drawing-Threaded-Rod-Stud.jpg |
| Bolt Dimensions | Stock Code: CR-Rod-07059-PA66 Material: Nylon PA66 Material Reference: PA66 Head/Drive Type: Fully Threaded Rod size: M10 x 1000 D: 10 mm Pitch: 1.5 mm L: 1000 mm |
| Width -mm | 10 mm (W) |
| Length - mm | 1000 mm (L) |
| Thickness / Depth -mm | 10 mm (D) |
| Diameter -mm | 10.00 |