Stock code 606
10x White PP Hex Head Plastic Screws & Bolts M10 x 60 mm, Nuts & Washers
A closer look.
In stock
Check the fit. Technical specification
- Product type
- Hex Head Bolts
- Size (mm)
- M10 x 60mm
- Thread
- M10
- Material
- PP / Polypropylene
- Colour
- White
- Pack size
- 10
- Diameter
- 10.00 mm
- Length
- 60 mm
- Width
- 10 mm
- Thickness / depth
- 10 mm
- Pitch
- 1.5 mm
Inch values are converted from millimetres. Fractions are approximate, rounded to the nearest 1/16 in. Thread diameter and pitch are not shown as fractions.
Dimensions & documents
- Conformity SafetyPDF document
- Polypropylene (PP) — Material DatasheetPDF document
- Polypropylene (PP) — Screws & Bolts DatasheetPDF document
- Technical drawingDrawing, image
Bolt, nut and washer dimensions
Bolt
Head/Drive Type: Hexagon Head Bolt, size: M10 x 60, D: 10 mm, Pitch: 1.5 mm, L: 60 mm, HD: 15.79 mm, HH: 6.4 mm
Nut
Material: Polypropylene, Head/Drive Type: Hexagon Nut, size: M10, N (mm): M10, HN B: 15.87 mm, HN H: 8.22 mm
Washer
Material: Polypropylene, Head/Drive Type: Flat washer, size: M10, W0 A: 19.74 mm, W0 B: 10.64 mm, W0 T: 2.0 mm
Description
Features
- 10x Bolts, 10x Nuts, 10x Washers. Pantone White 11-0601-TCX. Material: PP. Type: Hex Head Bolts. Length: 60mm. Diameter: 10mm. Pitch: 1.5mm. Across flats: 16mm. Head height: 6.4mm. SKU: 606.
- Polypropylene is renowned for its high strength-to-weight ratio, inherent flexibility, and moderate resistance to impact.
- Polypropylene has good chemical resistance over a wide range of bases and acids, as well as most solvents. It is very resistant to absorbing moisture.
- These lightweight, non-corroding, insulating fixings are suited to chemical and wet environments, electrical enclosures and general assembly where metal would rust or react.
- The hex head sits above the surface for access during fitting, removal and refitting. Also known as hex bolts, hexagon head screws.
Product Summary
Pack of 10 white polypropylene hex head bolts, M10 x 60 mm, with 10 nuts and 10 washers. Thread pitch: 1.5 mm. Polypropylene has good chemical resistance over a wide range of bases and acids, as well as most solvents. It is an economical, lightweight material with a high strength-to-weight ratio, inherent flexibility and moderate impact resistance. Polypropylene is very resistant to absorbing moisture and is a good electrical insulator. The material is non-corroding. Hex head bolts are also known as plastic bolts or plastic screws.
Reviews from our marketplace customers (5)
Write a ReviewWrite a Review
Caterpillar Red
10x White PP Hex Head Plastic Screws & Bolts M10 x 60 mm, Nuts & Washers
Star ratings left without a comment are included in the average but not listed.