2x Natural PA66+GF M6 x 200 mm Threaded Rods — Short Reinforced Nylon Studding

Features:

• 2x Threaded Rods. Material: Glass-Fibre Reinforced Nylon Polyamide 66, PA66+GF. Length: 200mm. Diameter: 6mm. Pitch: 1mm. SKU: 981.
• Glass-fibre reinforcement increases stiffness and dimensional stability compared with unfilled PA66, giving a firmer plastic threaded rod.
• Non-metallic nylon body with useful wear resistance and electrical insulation for light-duty plastic-threaded assemblies.
• Fully threaded from end to end, so compatible M6 nuts can be positioned along the available 200mm length.
• Use for short reinforced spacing, small stand-offs and compact alignment points; cut carefully and check thread engagement before final use.

Product Summary:

These M6 x 200 mm natural PA66+GF threaded rods are supplied as 2 fully threaded glass-fibre reinforced nylon plastic rods. Each rod has a 6mm nominal diameter, 200mm length and 1mm pitch. The glass reinforcement gives a stiffer and more dimensionally stable plastic threaded bar than unfilled PA66, while still keeping the part non-metallic and easy to cut with suitable tools. This size is useful for short reinforced spacing, small stand-offs and compact alignment points, especially where a metal rod is unnecessary or undesirable. PA66+GF is harder and less flexible than plain nylon, so allow for careful cutting, clean thread engagement and suitability checks before final fitting. Use with compatible M6 nuts for light-duty spacing, alignment, mounting and general plastic-threaded assembly work.