Stock code 541
50x Glass Filled Nylon Countersunk Machine Screws M3 x 25 mm, Nuts & Washers
- Thread M3
- Length 25 mm
- Material Nylon PA 66 / 50% Glass Fibre Reinforced
- Colour Natural
- Pack size 50
Save at least 10% when you buy direct
In stock
Request a quoteOther lengths
Data sheets
Technical specification
- Product type
- Countersunk Cross Head Bolts
- Size (mm)
- M3 x 25mm
- Thread
- M3
- Material
- Nylon PA 66 / 50% Glass Fibre Reinforced
- Colour
- Natural
- Pack size
- 50
- Diameter
- 3.00 mm
- Length
- 25 mm
- Width
- 3 mm
- Thickness / depth
- 3 mm
- Pitch
- 0.5 mm
Inch values are converted from millimetres. Fractions are approximate, rounded to the nearest 1/16 in. Thread diameter and pitch are not shown as fractions.
Bolt, nut and washer dimensions
Bolt
Head/Drive Type: Cross Countersunk Head Bolt, size: M3 x 25, D: 3 mm, Pitch: 0.5 mm, L: 25 mm, HD: 5.35 mm, HH: 1.65 mm
Nut
Material: Polyamide+fiberglass, Head/Drive Type: Hexagon Nut, size: M3, N (mm): M3, HN B: 5.41 mm, HN H: 2.28 mm
Washer
Material: Polyamide+fiberglass, Head/Drive Type: Flat washer, size: M3, W0 A: 6.82 mm, W0 B: 3.29 mm, W0 T: 0.5 mm
Description
Features
- 50x Bolts, 50x Nuts, 50x Washers. Colour: Natural. Bolt material: PA66 / 50% glass fibre. Type: Countersunk Cross Head Bolts. Length: 25mm. Diameter: 3mm. Pitch: 0.5mm. Head diameter: 5.3mm. Head height: 1.6mm. SKU: 541.
- The glass-reinforced nylon has improved tensile and flexural strength, impact resistance and wear resistance compared with unreinforced PA66.
- The nylon PA66 contains 50% glass fibre.
- Improvements include greater tensile strength, a higher heat deflection temperature and lower moisture absorption.
- The countersunk cross head sits flush with the surface when fitted in a countersunk hole. Also known as cross-recess countersunk screws, flat head screws.
Product Summary
These countersunk cross head bolts are made from nylon PA66 that contains 50% glass fibre. The heat deflection temperature of PA66+GF is higher than that of unreinforced PA66, so the composite can withstand higher temperatures before deforming under load. It has reduced moisture absorption and improved tensile and flexural strength. The countersunk head sits flush with the surface when fitted in a countersunk hole. These fasteners are also known as plastic bolts or plastic screws.
Reviews from our marketplace customers
Write a ReviewWrite a Review
Caterpillar Red
50x Glass Filled Nylon Countersunk Machine Screws M3 x 25 mm, Nuts & Washers
No reviews yet.